VORTEX automatically pushes firmware updates to your device on a regular schedule. The default schedule for these updates is between 00:00 and 02:00 every day, according to your camera's local time.
If you prefer, you can adjust this schedule to better suit your needs. You might want the updates to occur during a specific "maintenance window" that you specify. To do this, please follow the next steps.
Step 1. Go to the "System" tab in your camera's settings. You should see a section titled "Auto Firmware Update".
Step 2. In the "Auto Firmware Update" section, you can set your desired maintenance window. This window must be at least two hours long.
If you set the schedule to less than 2 hours you won't be able to save your changes.
Once you've set your maintenance window, save your changes. Your camera will now automatically update its firmware during the window you've specified.
IMPORTANT NOTE: This feature is not available in VORTEX Connect.
Comments
0 comments
Article is closed for comments.