[VSS] Can the VAST Security Station HTTPS access port can be changed after installation?

Question

Can the VAST Security Station HTTPS access port can be changed after installation?

Answer

Yes, the HTTPS access port can be changed if needed. Please follow these steps to do so:

Step 1. Access the VSS software using your access credentials.

Step 2. In the Live View interface, click on the 'gear' icon, and then select the 'Settings' option to access the server configurations.

Step 3. In the "Device" section, select "Stations". 

Step 4. Select the 'VMS_Station'. If you have previously changed the name of the station, or if you have several stations added to the system, hover your mouse over the name to check the server's IP.

Step 5. Change the port to the value you require, for example 443.

The acceptable range for HTTPS ports is typically between 1 and 65535, as these are the standard port numbers available for use in TCP/IP networking.

In order for the changes to take effect you need to log out and login again. 

Step 6. Use the new port to access the VSS software.