How to export the backup/configuration file of the ND/NV-Series NVR(Linux-based)?

The NVR backup file contains the device configuration files, usually this file is exported as a security measure in case the device needs to be reset to defaults and then be restored with a predetermined configuration or previous configuration. This file can also be used by VIVOTEK Technical Support in case they require to reproduce an issue (using the same configuration parameters). In order to export the backup file of the ND/NV-Series NVR please follow the next guide:

Chose your interface:
There are two ways to access the NVR, please choose which one you access to NVR. 

• Web console.
• Local console.

Note: If you are planning to provide the configuration file to Technical Support for analysis/troubleshooting please remember to provide the password of the admin account as well.

Web console:

Step 1. Using a browser, access the NVR using the username and password.

Step 2. Click on the gear icon to access the NVR configuration page.

Step 3. Click on the "System" tab and select "Maintenance".

Step 4. In the "Maintenance" interface click on the "Backup" button to export the backup/configuration file of the NVR. 

Step 5.When the download promp appears, click on "Save" to save the backup file to the computer.

Step 6.Be sure that the file was correctly stored.

Local console:

Step 1. Prepare and insert the USB into the NVR USB port. You can use either the back panel USB and frontal panel USB ports (if any) to extract the files. 

Step 2. In the Live View interface, click on the gear icon to access the device configuration page. 

Step 3. Go to the system tab, select the maintenance section and click on the "Backup" button to copy the configuration file in the USB.