QUESTION
What to do when you cannot send CGI command to the camera after upgrade the camera firmware to the latest?
ANSWER
Due to security researcher discovered that VIVOTEK Network camera have Cross-Site Request Forgery(CSRF) vulnerability, we created this function to avoid it. For more CSRF information, please check the Security Advisory on our website: https://www.vivotek.com/cybersecurity
You can disable this function if needed.
Please go to Security > Miscellaneous and disable the following settings.

Then, you will be able to send CGI commands to the camera.
This feature was applied from firmware version 0x06b.
You can disable this function if needed.
Please go to Security > Miscellaneous and disable the following settings.

Then, you will be able to send CGI commands to the camera.
This feature was applied from firmware version 0x06b.
Comments
0 comments
Article is closed for comments.