[VAST2][2.6.0.3005] How to configure user account’s authority when viewing/configuring cameras behind a sub-station

 

Question

How to configure user account’s authority when viewing/configuring cameras behind a sub-station by using LiveClient?
Note: this function is not available in VAST2 so if you require to use it you must use LiveClient instead.

Answer

For example, there are CMS station and sub-station NVR B with 3 cameras each. We want to achieve:
●  User A can view/configure camera 1&2 in CMS station and camera 3 in NVR B.
●  User B can view/configure camera 3 in CMS station and camera 1&2 in NVR B.

a. Open LiveClient and login with admin account.

b. Go to “Configuration -> Logical Tree View Management“.
1.    Check the cameras in device list.
2.    Add to the logical tree list.

c. Go to “Configuration -> User Management”.
1.    Create a user account.
2.    Choose logical tree.
3.    Configure camera’s access authority for the user.

d. Login to the “Test account”, check if the result is right.