Skip to main content

Back to website Submit a request

Sign in

Search

Welcome to our Support

VIVOTEK Support Center
Knowledge Base
VAST2
System/Alarm (VAST/VAST2)

Articles in this section

[VAST] How to avoid LiveClient popping up the message "Due to surface lost, the render mode...."?
[VAST] In what situation would the LiveClient display the message 'Due to surface loss, the render mode...?'
[VAST2][2.7.0.5800]VAST2 crash after adding the IP8361 into live view
[VAST2]What to do if ND series NVRs are unable to add as substations?
[VAST2][2.7.0.5800] failed to add Linux-based NVR into VAST2 as substation via openVPN
[VAST2] How to change SSL certificate in the VAST/VAST2 software
How to set cybersecurity alarms in VAST2?
[ST7501][1.11.0.101] How to upgrade the ST7501 to VAST?
[VAST2][1.12.1.5] Can't login and the words can't be displayed
Import camera list

See more

Related articles

[Shepherd] How can I import same settings to a batch of cameras?
[VAST/VAST2] What's the command to execute Import-Export Utility in command line window?
[Shepherd] How install Shepherd tool into your PC
[VAST/ST7501] Is there any way to eliminate the red line rectangle of motion detection window?
How to get camera list with camera model name, firmware version and MAC addresses via Shepherd?

Import camera list

VIVOTEK

19 August 2021 09:31
Updated

QUESTION

Import camera list

ANSWER

Was this article helpful?

0 out of 2 found this helpful

Comments

0 comments

Article is closed for comments.

Español Japanese (Japan) 繁體中文

© © VIVOTEK Inc. All rights reserved.